Ricoh CL2000 Operating Instructions Manual page 284

C On the [Print Server Information] menu, click [Print Server Configuration].
D On the [Print Server Configuration] menu, click [Printer Configuration].
E Select the printer which is indicated as "Not Installed".
Important
Use the same number as that specified as the Remote Printer No. using NIB Setup Tool.
F
- D).
(Step
F If you want to change the name of the printer, enter a new name.
The name "Printer x" is assigned to the printer. The "x" stands for the number of the selected
printer.
G For type, click [Remote Parallel, LPT1].
IRQ, Buffer size, Starting form, and Queue service mode are automatically configured.
H Press the { { { { ESC} } } } key, and then click [Yes] in the confirmation dialog box.
I Press the { { { { ESC} } } } key to return to [Print Server Configuration Menu].
K K K K
Assign print queues to the created printer as follows:
A From [Print Server Configuration Menu], click [Queues Serviced By Printer].
B Select the printer created in step
C Press the { { { { INSERT} } } } key to select a queue serviced by the printer.
Note
You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, check the queues are assigned.
L L L L
Press the { { { { ESC} } } } key until "Exit?" appears, and then click [Yes] to close PCONSOLE.
Operating Instructions
J
.
Administrator Reference
85