Ricoh CL2000 Operating Instructions Manual page 400

Note
If you select "basic" or "digest", see next section "Configuring IPP user authorization" for more
information about how to configure the user name.
Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears.
msh> Input user number (1 to 10):
Type the number, user name and password.
msh> IPP user name:user1 msh> IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.
SPRINT
To make setting for IEEE 1394 (SCSI print), use the sprint command.
View settings
The IEEE 1394 (SCSI print) settings are displayed.
msh> sprint
Bidirectional configuration for the IEEE 1394 (SCSI print)
Use this setting to configure whether the IEEE 1394 (SCSI print) is bidirectional.
The factory default is "on".
msh> sprint bidi [on/off]
Operating Instructions Administrator Reference
201