Ricoh CL2000 Operating Instructions Manual page 342

Menu
HDD Format
ROM Update
4C.Graphic Mode
WL.LAN Signal
WL.LAN Defaults
Print Area
Key Repeat
Operating Instructions
You can format the Printer Hard Disk.
Available when the optional Printer Hard Disk is installed.
Reference
For more information about formatting the Printer Hard Disk, see
"Printer Hard Disk Type 3000", Option Setup Guide.
This menu is not currently used.
This setting adjusts how much each color of toner overlaps when printing. If
characters or lines are blurred, selecting [Text Priority] may make them clearer.
Select [Photo Priority] for normal use.
Note
Default: Photo Priority
You can check the signal strength when using the wireless LAN.
Reference
For more information about displaying the signal strength. See
p.149 "Displaying the Signal
You can reset the wireless LAN settings to the default.
You can extend the printable area by about 2.5 mm (0.01 inch).
• Normal
• Enlarge Area
Note
Default: Normal
The default setting [On] enables the user to scroll through menu items and set-
tings by holding the key down continuously, the [Off] setting requires the user to
press the key for each Cursor/Scroll movement.
Administrator Reference
Description
Strength".
143