Ricoh CL2000 Operating Instructions Manual page 163

Options
J J J J
Connect the Paper Feed Unit ca-
ble to the socket inside the printer
securely.
1
K K K K
Close the connector cover of the
printer.
To connect two Paper Feed Units,
connect the paper feed unit cable
to the socket inside the Paper Feed
Unit securely, and then close the
connector cover.
9
Note
❒ When moving or transporting
the printer, make sure to un-
plug the Paper Feed Unit con-
nector. For more information,
see "Moving and Transporting
the Printer" in the Maintenance
Guide.
Note
❒ After finishing installation, you
can check whether the Paper
Feed Unit is installed properly.
Print the configuration page
ZHBP370E
from th e " L is t/T est Prin t"
menu. If it is installed properly,
you will see "Paper Feed Unit
(Tray 2)" or "Paper Feed Unit
(Tray 3)" under the "Options"
list.
❒ If the Paper Feed Unit is not in-
stalled properly, reinstall it
from step
stall it properly even after at-
tempting reinstallation, contact
your sales or service representa-
tive.
ZHBP380E
Reference
For more information about
printing the configuration page,
see "Making Printer Settings
with the Control Panel", Admin-
istrator Reference.
See "Loading Paper", Mainte-
nance Guide.
Important
❒ Before using the new Paper
Feed Unit, you must make set-
tings in the printer driver.
ZHBP390E
C
. If you cannot in-