Ricoh CL2000 Operating Instructions Manual page 289

J J J J
After confirming the settings, click [Next>].
The settings take effect, and NIB Setup Tool closes.
K K K K
Exit SmartDeviceMonitor for Admin.
L L L L
Turn the printer power off and on.
Note
To check the printer is configured correctly, enter the following after the command prompt:
F:> NLIST USER /A/B
If the printer works as configured, the name of the print server appears as an attached user.
Using Pure IP in the NetWare 5/5.1, 6/6.5 Environment
A A A A
Log on to the file server as an Admin or the equivalent of an Admin.
B B B B
Run SmartDeviceMonitor for Admin.
C C C C
Click [Property Sheet], and then click [OK].
The [NIB Setup Tool] dialog box appears.
D D D D
Click the [NetWare] tab, and make the following settings:
A In the [Print Server Name] box, enter the name of the print server.
B In the [File Server Name] box, enter the name of the file server in which a print server is to
be created.
By clicking [Browse], you can select a file server among those listed in the [Browse File Server]
dialog box.
Operating Instructions Administrator Reference
90