Windows 2000 Print Server Configuration; Configuring The Protocols; Configuring Tcp/Ip And Ipp For Printing - Ricoh CL2000 Operating Instructions Manual

1. Windows 2000 Print Server Configuration

To use a network printer, click [SmartDeviceMonitor], [Standard TCP/IP Port], or [LPR Port] when in-
stalling the printer driver.
• SmartDeviceMonitor
See p.14 "Configuring the Protocols"
5c or RPCS Printer Driver"
• Standard TCP/IP Port, LPR Port
See p.14 "Configuring the Protocols"
p.24 "Installing the PostScript Printer
Note
If you want to use LPR Port, Print Services for UNIX must be installed. For details, see Windows
2000 Help.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing

Follow these instructions to configure the Network Interface Board and Windows 2000 to use the
TCP/IP protocol and IPP.
Preparation
To use NetBEUI, use the SmartDeviceMonitor for Client port.
Configuring the printer
Configure the printer to use TCP/IP.
• Check TCP/IP is set to active. (The factory default is active.)
• Assign an IP address and make other settings required for TCP/IP .
Operating Instructions
and p.18 "Installing Software"
or p.24 "Installing the PostScript Printer
and p.19 "Installing the PCL 5c or RPCS Printer Driver"
Driver".
Administrator Reference
and p.19 "Installing the PCL
Driver".
14
or