Ricoh CL2000 Operating Instructions Manual page 539

B
Click the printer you want to use, and then click [OK].
Note
Printers that respond to a broadcast from the computer will be displayed. To print to a
printer not listed here, click [Specify Address], and then enter the NetBEUI address. Confirm
the NetBEUI network address is on the configuration page. For more information about
printing the configuration page, see "Printing a Configuration Page", Administrator Refer-
ence. NetBEUI address appears as "\\RNPxxxx\xxx" on the configuration page. Enter the
printer's network path name in the form of "%%Computer name\Share name". Do not en-
ter "\\" as head characters but "%%".
You cannot print to printers beyond routers.
IPP
A
Click [IPP].
The IPP setting dialog box appears.
B
To specify the printer's IP address, enter "http://(printer's-ip-address)/ printer" or "ipp://(print-
er's-ip-address)/printer" in the [Printer URL] field.
(Example: IP address is 192.168.15.16)
http://192.168.15.16/printer
ipp://192.168.15.16/printer
C
If necessary, enter the names to distinguish the printer in the [IPP Port Name] box. Enter a
different name from those of existing port names.
If you do not do this, the address entered in the [Printer URL] box will be set as the IPP port name.
D
If a proxy server and IPP user name are used, click [Detailed Settings], and then configure
the necessary settings.
Note
For more information about these settings, see SmartDeviceMonitor for Client Help.
E
Click [OK].
Operating Instructions Client Reference
73