Ricoh CL2000 Operating Instructions Manual page 231

- Bidirectional transmission -
- -
When bidirectional transmission is enabled, information about paper size and feed direction settings
is automatically sent to the printer by a computer. You can also check the printer status from your
computer.
• Bidirectional transmission is supported by Windows 95/98/Me/2000/XP, Windows Server 2003,
and Windows NT 4.0.
• If you use the RPCS printer driver and bidirectional transmission is enabled, the [Change Accesso-
ries] tab is shaded, and cannot be modified
Note
The RPCS printer driver supports bidirectional transmission and updates the printer status automat-
ically.
The PCL 5c printer driver supports bidirectional transmission; you can update the printer status
manually. However, it does not support bidirectional transmission over a parallel connection.
The PostScript 3 printer driver does not support bidirectional transmission.
Bidirectional transmission requires the following conditions:
When connecting via parallel cable
• The computer must support bidirectional transmission.
• The printer must be set to bidirectional transmission.
• The interface cable must support bidirectional transmission.
• The machine must be connected to the computer using standard parallel cable and parallel con-
nector.
• Under Windows 2000, [Enable bidirectional support] must be selected and [Enable printer pool-
ing] must not be selected on the [port] tab with RPCS printer driver.
Operating Instructions Administrator Reference
32