Ricoh CL2000 Operating Instructions Manual page 81

Status
Paper jams occur frequently.
Solid areas, lines or text are
shiny or glossy when created as
a mixture of cyan, magenta,
yellow.
Solid lines are printed as broken
lines.
The color of the printout is dif-
ferent from the color on the
computer's display.
Images are printed in the wrong
orientation.
Possible Causes, Descriptions, and Solutions
The paper guide in the paper tray is not locked. Lock the pa-
per guide.
See p.22 "Loading Paper".
The paper size and feed direction loaded on the Bypass Tray
are different from them set with the control panel. Either
change the setting or load paper to meet the setting.
See p.24 "Loading Paper in the Bypass Tray".
The end guide in the paper tray is not set correctly. Set the
end guide correctly.
See p.22 "Loading Paper".
Number of paper set in the tray exceeds the limit. Confirm
that the top of the stack is not higher than the limit mark in-
side the tray.
See p.22 "Loading Paper".
Paper is damp. Use paper that has been stored properly.
See p.15 "Paper and Other Media".
Paper is either too thick or too thin.
See p.15 "Paper and Other Media".
Paper is bent or wrinkled. Use paper that have no bents or
wrinkles.
See p.15 "Paper and Other Media".
Paper has already been printed on.
See p.15 "Paper and Other Media".
The fusing unit is deteriorated or damaged. Replace them.
See p.29 "Replacing Consumables and Maintenance Kit".
Select "K(black)" for [Gray Reproduction] in the printer driver's
dialog box.
See the printer driver's Help.
Change the [Dithering] setting in the printer driver's dialog
box.
See the printer driver's Help.
The colors made using color toner are different from colors
displayed on the display in its production system.
See "Appendix", Client Reference.
When [Toner Saving] is checked under the [Print Quality] tab in
the printer driver's dialog box, the color gradation may ap-
pear differently.
See the printer driver's Help.
The feed direction you selected and the feed direction select-
ed in Option Setup of the printer driver might not be the
same. Make the proper settings.
Other Printing Problems
5
69