Removing Misfed Paper; When "Remove Misfeed A: Internal Path" Appears - Ricoh CL2000 Operating Instructions Manual

Removing Misfed Paper

When a paper misfeed occurs, an er-
ror message appears on the panel dis-
play. Remove the misfed paper from
the location indicated.
Important
❒ Toner dust may be on the misfed
paper after removal. Be careful not
to get it on your hands or clothes.
❒ Toner dust may be on the paper
printed after removing misfed pa-
per. Make a few prints until smears
do not appear any more.
❒ Forcefully removing misfed paper
may cause paper to tear and leave
scraps of paper in the printer. This
might cause a misfeed and damage
the printer.
When "Remove Misfeed A:
Internal Path" Appears
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "v" label (means
hot surface). Touching a part
with a "v" label (means hot sur-
face) could result in a burn.
A A A A
Open the front cover by pushing
the front cover release button.
Note
❒ Close the Bypass Tray if it is ex-
tended. If the Bypass Tray is ex-
tended, the front cover does not
open.
B B B B
If you see the misfed paper, slow-
ly pull it out.
If you cannot remove paper easily,
do not forcefully pull it, but go to
next step.
C C C C
Pull part "A" in the direction of the
arrow, and then open the cover.
ZHBP281E
Removing Misfed Paper
ZHBH120E
ZHBH070E
5
71