Ricoh CL2000 Operating Instructions Manual page 604

C
If necessary, enter the names to distinguish the printer in the [IPP Port Name] box. Enter a
different name from those of existing port names.
If you do not do this, the address entered in the [Printer URL] box will be set as the IPP port
name.
D
If a proxy server and IPP user name are used, click [Detailed Settings], and then configure
the necessary settings.
Note
For more information about these settings, see SmartDeviceMonitor for Client online
Help.
E
Click [OK].
LPR Port
A Select [LPR Port], and then click [OK].
B In the [Name or address of server providing lpd:] box, enter the printer's IP address.
C In the [Name of printer or print queue on that server:] box, enter "lp".
K K K K
Make sure the location for the selected printer is displayed after [Port].
L L L L
Configure the default printer as necessary.
Default Printer
Select the [Default Printer] check box to set the printer as the default printer.
M M M M
Click [Continue] to start printer driver installation.
N N N N
When the [Select Program] dialog box appears, click [Finish].
O O O O
When the [Installation completion.] dialog box appears, click [Finish].
Operating Instructions Client Reference
138