E E E E
Click [TCP/IP].
F F F F
Set WINS to active and enter the IP address of the WINS server in Primary WINS Server and
Secondary WINS Server.
G G G G
Click [Refresh].
H H H H
Exit the Web browser.
Using telnet
A A A A
Connect to the remote printer using telnet.
B B B B
Use the set command to make WINS active.
msh> set wins on
C C C C
Specify the IP addresses (primary and secondary) using the following commands.
msh> wins primary Ipaddress
msh> wins secondary Ipaddress
Note
To confirm the current configuration, use the show command.
D D D D
Log out from telnet.
Operating Instructions
Administrator Reference
243