Ricoh CL2000 Operating Instructions Manual page 583

Installing the Printer Driver
Note
If you want to install another printer driver after setting the "1394_00n" port, select the "1394_00n"
port by following the procedure for installing a printer driver.
When the printer connected via the optional IEEE 1394 interface board is installed properly, the icon
in the printer folder changes depending on whether the cable is attached or not.
A A A A
Connect the printer and computer using the IEEE 1394 interface cable.
B B B B
In the [Found New Hardware Wizard] dialog box, confirm that [This wizard helps you install soft-
ware for: (Unknown)] is displayed, and click [Install from a list or specific location (Advanced)], and
then click [Next>].
C C C C
When [Please choose your search and installation options.] appears, select the [Search for the best
driver in these locations.] check box, then select the [Include this location in the search:] check box.
D D D D
Hold down the left { { { { SHIFT} } } } key, and then insert the CD-ROM into the CD-ROM drive.
Note
Keep the left { { { { SHIFT} } } } key held down until the computer has finished accessing the CD-ROM.
If the Auto Run program starts, click [Cancel], and then click [Exit].
E E E E
Click [Browse].
F F F F
Select the printer driver you want to use. The following are locations on the CD-ROM where
printer drivers are stored:
• RPCS
\DRIVERS\RPCS\WIN2K_XP\(Language)\DISK1
• PCL 5c
\DRIVERS\PCL5C\WIN2K_XP\(Language)\DISK1
Operating Instructions Client Reference
117