Ricoh CL2000 Operating Instructions Manual page 71

Messages/Second messages
Load Paper
/Paper Size:
Paper Type
Load Paper
Tray #
Menu Protected
Cannot Change
No Files
Exist
Remove Misfeed
B: Fusing Unit
Remove Misfeed
A: Internal Path
Remove Misfeed
Y: Paper Tray
Remove Paper
Standard Tray
Error & Status Messages on the Control Panel
Description
The paper size set in the indi-
cated tray differs from the set-
ting made.
The indicated tray is out of pa-
per.
#: tray number
The menu is protected.
There are no files available for
Sample Print job or Locked
Print job.
There is a misfeed in the fusing
unit.
There is a misfeed in the
printer.
There is a misfeed in the input
tray, or the printer is not feed-
ing paper.
The standard output tray is
full.
Solution
Load paper of the selected size
in the tray, and then change
the paper size setting with the
control panel.
Or press the { { { { Form Feed} } } } key
several times until the tray
with the desired paper type
and paper size appears on the
panel display.
Or press the { { { { Job Reset} } } } key to
cancel the print job.
Load paper of the selected
type in the tray, and then
change the paper size setting
with the control panel.
Or press the { { { { Form Feed} } } } key
several times until the tray
with the desired paper type
and paper size appears on the
panel display.
Or press the { { { { Job Reset} } } } key to
cancel the print job.
Load paper into the indicated
paper tray.
The setting cannot be changed
for the selected menu.
You can check the error files in
the error log.
Remove the misfed paper.
For more information, see
p.72 "When "Remove Misfeed
B: Fusing Unit" Appears".
Remove the misfed paper.
For more information, see
p.71 "When "Remove Misfeed
A: Internal Path" Appears".
Remove the misfed paper.
For more information, see
p.74 "When "Remove Misfeed
Y: Paper Tray" Appears".
Remove paper from the stan-
dard output tray.
5
59