Ricoh CL2000 Operating Instructions Manual page 73

Messages/Second messages
Reset
Duplex Unit
Replace
Transfer Belt
SC XXX-X
Power Off On
Toner is Almost
Empty: Black
Toner is Almost
Empty: Cyan
Toner is Almost
Empty: Magenta
Toner is Almost
Empty: Yellow
Error & Status Messages on the Control Panel
Description
The duplex unit is not set cor-
rectly or is not set.
It is time to replace the trans-
fer belt.
The Service Code or SC num-
ber indicates the problem.
The black toner is almost
empty.
The cyan toner is almost
empty.
The magenta toner is almost
empty.
The yellow toner is almost
empty.
Solution
Remove and reinstall the du-
plex unit. If the message ap-
pears again, contact your sales
or service representative. See
Option Setup Guide.
Replace the transfer belt with
a new transfer belt.
See p.29 "Replacing Consum-
ables and Maintenance Kit".
Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Prepare a new black toner car-
tridge.
Prepare a new cyan toner car-
tridge.
Prepare a new magenta toner
cartridge.
Prepare a new yellow toner
cartridge.
5
61