802.11B Interface Unit Type A - Ricoh CL2000 Operating Instructions Manual

802.11b Interface Unit Type A

R CAUTION:
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Before touching the 802.11b Inter-
face Unit, touch something metal
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit
❒ Do not subject the 802.11b Inter-
face Unit to physical shocks.
A A A A
Check the contents of the package
for the following:
❖ ❖ ❖ ❖ 802.11b Interface Unit Type A
• Interface Unit
• Card
• Antenna
B B B B
Turn off the power, and then un-
plug the power cable.
C C C C
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
ZHBP410E
board.
D D D D
While holding the handle, pull
out the controller board slowly.
ZHBP420E
802.11b Interface Unit Type A
M
to fasten the controller
1
ZHBP430E
ZHBP080E
ZHBP020E
24