Ricoh CL2000 Operating Instructions Manual page 387

D D D D
Exit telnet.
msh> logout
When the configuration is changed, a confirmation message requests whether or not the changes
should be saved.
E E E E
Type "yes" to save the changes, and then press { { { { Enter} } } } .
If you do not want to save the changes, type "no", and then press { { { { Enter} } } } . If you want to make ad-
ditional changes, type "return" at the command line, and then press { { { { Enter} } } } .
Note
If the "Can not write NVRAM information" message appears, the changes are not saved. Repeat
the steps above.
The Network Interface Board is reset automatically when the settings are changed.
When the Network Interface Board is reset, the active print job which has already been sent to
the printer will finish printing. However, jobs that have not been sent yet will be canceled.
Operating Instructions Administrator Reference
188