Adjusting The Tray Registration - Ricoh CL2000 Operating Instructions Manual

Adjusting the Tray Registration

You can adjust the registration of
Tray 2 and Tray 3 (optional Paper
Feed Unit). The vertical adjustment is
used for all trays. Normally, you need
not update the registration. But when
the optional Paper Feed Unit or the
Duplex Unit is installed, updating the
registration is useful in some cases.
The following procedure describes
how to adjust the registration of Tray
2. You can use the same procedure to
adjust the other tray as well.
A A A A
Press the { { { { Menu} } } } key.
"Menu" appears on the panel dis-
play.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Maintenance", and then
press the { { { { Enter #} } } } key.
Menu:
Maintenance
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Registration", and then
press the { { { { Enter #} } } } key.
Maintenance:
Registration
D D D D
Print the test sheet to preview the
settings.
A Confirm that "Prt. Test Sheet"
is displayed, and then press
the { { { { Enter #} } } } key.
Registration
Prt. Test Sheet
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play the tray to adjust, and
then press the { { { { Enter #} } } } key.
Prt. Test Sheet:
Tray 2
The test sheet is printed, and
then the printer returns to the
previous menu.
E E E E
Confirm the position of the image
on the test sheet, and then adjust
the registration value.
ZHBS010E
The following steps show how to
adjust the registration value to
make the margins equal.
Adjusting the Tray Registration
4
53