Initializing A Formatted Scsi Hard Disk - Tektronix Phaser 220e Reference Manual

7
Using Fonts and SCSI Hard Disks

Initializing a formatted SCSI hard disk

7-12
Phaser 220 Color Printers
Use this procedure to initialize a formatted SCSI hard disk connected to a
Phaser 220i printer. Use one of the following Þles depending on your
computer type.
Macintosh file name
LaserWriter Utility
*Available only on the Phaser 220i.
Macintosh users
1.
The LaserWriter Utility is compressed into the Phaser 220
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2. Locate the LaserWriter Utility Þle in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
3. Select the appropriate printer in the Chooser.
4. Double-click the LaserWriter Utility icon.
5.
Choose Initialize PrinterÕs Disk from the File menu. (This
option is grayed out (unavailable) if no SCSI disk is connected
to the printer.)
6. Select the Þle name then click Open.
PC file name
INITDISK.PS*