Tektronix Phaser 220e Reference Manual page 96

6
Selecting Color Corrections
6-10
Phaser 220 Drivers and Utilities
Sending PC files to the printer
1.
Phaser 220i: Place both Switch 8 and Switch 9 in the up position.
Phaser 220e: Place Switch 3 in the up position.
2. Locate the color correction utility Þles in the PHSR220 directory on
the Printer Utilities diskette.
3.
Copy the Þles to your hard disk, or use them from the diskette.
4. PC users: Use the DOS COPY command to send a Þle to
the printer.
Workstation users: Ensure that the printer port is conÞgured to
receive PostScript, then send the Þle to the printer.