Pantone Color Library For Aldus Freehand - Tektronix Phaser 220e Reference Manual

2
Printing From a Macintosh

PANTONE Color Library for Aldus FreeHand

2-16
Phaser 220 Drivers and Utilities
The PANTONE Tek Phaser 220.clib Þle is used by the application to properly
specify PANTONE Colors for Aldus FreeHand and Phaser 220 printers. This
Þle is application-speciÞc and printer-speciÞc. Do the following procedure
to load the color library Þle.
For FreeHand 3.0, refer to the Aldus FreeHand User Manual Version 3.0 for
Apple Macintosh computers for more information on color libraries.
For FreeHand 3.1, refer to the Aldus FreeHand Guide to Installation, System 7.0
Compatibility, and Feature Updates: Version 3.1 for Apple Macintosh computers
for more information on color libraries.
1. Open FreeHand.
2. Open the Colors palette in FreeHand (Command + 9).
3.
For FreeHand 3.0: choose Library from the Colors palette
submenu; a dialog box appears listing available color libraries.
For FreeHand 3.1: choose Import from the Colors palette
submenu; a dialog box appears listing available color libraries.
4. Select and open the PANTONE
Þle for your printer. A dialog box appears with a list of available
colors.
5. Select color type, either Process or Spot.
6. Select the colors you want to use, then click OK. Select one color
at a time, or hold down the shift key and click to select several
colors, or press Command + A to select all colors in the list.
Selected colors are added to the Colors palette, the Colors dialog
box, and all Colors pop-up menus.
¨
-Tek Phaser 220.clib color library