Improving Print Speed - Tektronix Phaser 220e Reference Manual

Improving print speed

Note There are different ways to improve print speed, such as by
upgrading to EtherTalk on a Macintosh, to Novell on a PC, or to
TCP/IP on a workstation. For more information, request a
document catalog from HAL, the Tektronix automated fax system.
Refer to the topic ÒUsing the automated fax systemÓ in this
chapter for instructions on using HAL.
If you tried to print a document with bitmapped images to a PostScript Level
2 printer, but are dissatisÞed with the speed of the output, here are some
suggestions:
Macintosh and Windows users:
When you use any color correction option (other than None), your
printer can take longer to process bitmapped images.
Try printing with the Standard print quality mode.
Windows users:
Turn off the Print Manager; printing via the Print Manager is
slower, but turning it off ties up the PC longer.
Select the Tektronix Phaser 220 printer in the Printers dialog box.
Verify that the Use PostScript Level 2 Features check box in the
Advanced Options dialog box is turned on.
From your application, choose the Tektronix Phaser 220 as your
printer.
Try printing the document again.
Troubleshooting
Printing Reference
10
10-7