Enabling And Disabling The Startup Page - Tektronix Phaser 220e Reference Manual

8
Modifying Printer Operation

Enabling and disabling the startup page

8-4
Phaser 220 Drivers and Utilities
You can choose to have a startup page print each time the printer is turned
on or reset, or you can disable the startup page. The startup page provides
general printer information, such as the printerÕs name, number of pages
printed, available ports, version numbers, and the type of transfer roll
installed. If you decide to disable the startup page, keep a copy to help you
troubleshoot printing problems.
Use one of the following Þles depending on your computer.
Macintosh file name
LaserWriter Utility
Macintosh users
1. The LaserWriter Utility is compressed into the Phaser 220
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2.
Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
4.
Double-click on the LaserWriter Utility icon.
5. Select the Set Startup Page command in the Utilities menu.
6. Select either the on or off button, then click OK.
PC file name
STARTPG.PS
NOSTRTPG.PS