Ppd Printer Description File - Tektronix Phaser 220e Reference Manual

2
Printing From a Macintosh
PPD printer description Þle
2-14
Phaser 220 Drivers and Utilities
There are 3.0 and 4.1 versions of the PPD Þles; use the version required by
your application. Each version is located in a separate folder. However, if
you need to check the ÞleÕs version number (3.0 or 4.1), open the Þle in a text
editor and check the *FormatVersion line near the beginning of the Þle.
Note Also included on the Macintosh Printer Utilities diskette are 3.0
and 4.1 TKP220J1.PPD Þles for use with the Japanese Kanji
language version of the printer.
Version 3.0 PPDs
The Phaser 220i TKP220I1.PPD Þle (TK220171.PPD for the 17-font version of
the Phaser 220e; TK220391.PPD for the 39-font version of the Phaser 220e) in
the 3.0 PPDs folder is a PostScript Printer Description Þle for Aldus, Adobe,
and other applications. This Þle is based on the Adobe Printer Description
Files SpeciÞcation Version 3.0. Refer to your applicationÕs documentation to
see if this is the version PPD you should use.
Use the appropriate PPD Þle with Aldus PageMaker version 4.x,
Canvas 3.0, and with Aldus FreeHand 3.1.
Place the appropriate 3.0 PPD Þle with your other PPD Þles on
your hard disk according to application needs. Typically, PPD
Þles are located in the PPDs folder, in the Aldus folder, inside the
System Folder. Refer to your applicationÕs documentation for
details. This Þle is used automatically by applications that require
the information.
If you are using Canvas 3.0, drag the appropriate 3.0 PPD Þle into
the PPDs folder on your computerÕs hard disk. The PPDs folder
may be found in the Canvas folder if you donÕt have any Aldus
applications.