Changing The Printer's Name - Tektronix Phaser 220e Reference Manual

8
Modifying Printer Operation

Changing the printer's name

8-2
Phaser 220 Drivers and Utilities
This procedure lets you change the printer's LocalTalk name. If the printer is
also connected through EtherTalk, the name change is applied to both
LocalTalk and EtherTalk names. The name selected here prints on the startup
page and appears in the Chooser on a Macintosh. The name can be up to 31
characters long, and may contain any printable characters except @ (at sign)
and : (colon).
The default printer name is Phaser 220i or Phaser 220e depending on which
printer you have. A change is persistent across printer power cycles.
Use one of the following Þles depending on your computer.
Macintosh file name
LaserWriter Utility
Macintosh users
1. The LaserWriter Utility is compressed into the Phaser 220
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2. Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility Þle in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
4. Double-click on the LaserWriter Utility icon.
5.
Select Name Printer from the Utilities menu. The currently
selected printer is listed in the dialog box. Type the new name in
the edit box.
PC file name
PRNTNAME.PS