Tektronix Phaser 220e Reference Manual page 82

5
Selecting Media and Image Options
5-6
Phaser 220 Drivers and Utilities
PC and workstation users
1.
Locate the UPPRTRAY.PS, LOWRTRAY.PS, and ANYTRAY.PS Þles
in the PHSR220 directory on the Printer Utilities diskette.
2. Copy the desired Þle to your hard disk, or use the desired Þle from
the diskette.
3. PC users: Use the DOS COPY command to send the desired Þle to
the printer. For example, if you want to send the Þle to the parallel
port, type the following at the DOS prompt:
COPY Þlename LPT1:
(or COM1 if you want to send the Þle to the serial port).
Workstation users: Make sure that the printer port is conÞgured
to receive PostScript, then send the desired Þle to the printer.