Installing The Tektronix Driver On A Network - Tektronix Phaser 220e Reference Manual

Installing the Tektronix driver on a network

1. Install the Tektronix Windows driver as described in the topic
ÒInstalling the Tektronix driverÓ in this chapter.
2.
Edit the CONTROL.INF Þle as follows to make the driver available
to other users:
a. Start Notepad, or a similar text editor.
b. Insert the Tektronix Windows 3.1 Windows Driver diskette
into your computerÕs disk drive, for example drive B.
c. In Notepad, open the CONTROL.ADD Þle on the Tektronix
diskette.
d. Locate the entries for Tektronix Phaser printers. Select your
printer (highlight the line with your printer), and copy the line
to the Clipboard by selecting Copy from the Edit menu. If
desired, you can select and copy all of the Tektronix printers
listed.
e. In Notepad, open the CONTROL.INF Þle located in the
network Windows System directory, by selecting Open from
the File menu.
f.
Search for the string Phaser to Þnd the existing Tektronix
printer entries.
g. Paste the printer information from the Clipboard into the
CONTROL.INF Þle above the existing Tektronix printer
entries, by selecting Paste from the Edit menu.
h.
If desired, the existing Tektronix printer entries can be deleted
or commented-out by placing a semicolon (;) at the beginning
of each line. It might be less confusing to users to have only
one Tektronix printer to choose from in the driver.
3. Windows users can add the Tektronix printer to their Printers
Control Panel in the usual way.
Printing From a PC
Printing Reference
3
3-11