Tektronix Phaser 220e Reference Manual page 98

6
Selecting Color Corrections
Using the switches with a utility file
Phaser 220i: Place Switch 8 and Switch 9 in the up position, then
send a color correction utility Þle to the printer to set a
user-deÞned color correction. Refer to the tables under the topic
ÒMaking color corrections,Ó in this chapter for a list of available
corrections.
Phaser 220e: Place Switch 3 in the up position, then send a color
correction utility Þle to the printer to set a user-deÞned color
correction. Refer to the tables under the topic ÒMaking color
corrections,Ó in this chapter for a list of available corrections.
6-12
Phaser 220 Drivers and Utilities