Tektronix Phaser 220e Reference Manual page 141

2.
Locate the LaserWriter Utility in the folder on your hard disk
containing decompressed utility Þles. You may want to place this
utility in a Utilities folder, or leave the utility on your desktop if
you use it often.
3. Select the appropriate printer in the Chooser.
4.
Double-click the LaserWriter Utility icon to start the application.
5. Choose Download PostScript File from the Utilities menu.
6. Select the Reset Printer Þle in the list then click Open.
7.
At the prompt Save PostScript output as: you are asked
for a Þle name for saving printer output. Use either the default
name given in the edit box or type in a new name. Click Save to
send the Þle to the printer.
Note The process of resetting the printer takes a few minutes to
complete. You will receive a message on your screen indicating
that the connection has been interrupted during the reset. The
connection is re-established after the reset, so you can ignore this
message; click the Continue button.
8. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box. Click OK in the box to continue.
Modifying Printer Operation
Printing Reference
8
8-9