Tektronix Phaser 220e Reference Manual page 86

5
Selecting Media and Image Options
5-10
Phaser 220 Drivers and Utilities
Macintosh users
The print quality mode Þles are compressed into the archive Þle Phaser 220
Utilities.sea on the Macintosh Printer Utilities diskette, and must be
decompressed before you can use them. To decompress this Þle, follow the
steps listed in Chapter 1, ÒBefore You Begin.Ó After decompressing the Þle,
continue with the steps listed below.
1. Locate the print quality mode Þles in the folder on your hard disk
containing decompressed utility Þles.
2.
Select the printer in the Chooser.
3. Double click the ÞleÕs self-sending arrow icon and click OK in the
dialog box to send the Þle to the printer.
PC and workstation users
1. Locate the print quality Þles in the PHSR220 directory on the
Printer Utilities diskette.
2.
Copy the Þles to your hard disk, or use the Þles from the diskette.
3. PC users: Use the DOS COPY command to send a Þle to the
printer.
Workstation users: Make sure that the printer port is conÞgured
to receive PostScript, then send the Þle to the printer.