Fixing Timeout Problems In Windows - Tektronix Phaser 220e Reference Manual

10
Troubleshooting

Fixing timeout problems in Windows

10-12
Phaser 220 Drivers and Utilities
The options in the Timeouts Þeld in the Printers/Connect dialog
box regulate your computerÕs communications with its
printer ports.
Device Not Selected: Type a value of 0, or between 15 and 999, in
this text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: Type a value between 45 and 999 in this text
box to change the number of seconds Windows waits after a print
job has begun sending characters to the printer before sending an
Alert message that the printer is no longer accepting data. The
default setting is 45 seconds. When using the Print Manager with a
shared printer, you should set this option to a larger value, such as
600 (10 minutes).