Using The Decompressed Fonts; Using Fonts With Windows - Tektronix Phaser 220e Reference Manual

7
Using Fonts and SCSI Hard Disks

Using the decompressed fonts

Using fonts with Windows

7-4
Phaser 220 Color Printers
For System 6.0.7 users: Use the Font/DA Mover (located on your Apple
system software diskettes) to install the fonts you want from the Phaser
Screen Fonts suitcase.
For System 7.0 users: Drag the fonts you want from the Phaser Screen
Fonts suitcase to the System Folder.
Select the printer font you want to use within an application and see the
same font on the screen.
Before printing, you need to make sure that the fonts speciÞed in your
document are installed in the printer. If you request a font in an application
that is not resident in the printer, the text is printed in the Courier typeface.
Or, to use fonts that are not resident in the printer, do one of the
following steps:
Using a font downloader supplied with your font package (or one
provided on the Printer Utilities diskette) download the desired
font to the printer.
Edit your WIN.INI Þle so that the Tektronix Windows driver
automatically downloads the fonts you want as part of a print job.
Refer to your Windows documentation for details on this
procedure.
Some font packages automatically update the PostScript port
entries in your WIN.INI Þle when you reinstall the fonts. Refer to
the font packageÕs documentation for instructions.