Printing From A Pc; Using The Tektronix Printer Driver For Windows; System Requirements; Accessing On-Line Help - Tektronix Phaser 220e Reference Manual

Chapter
3

Using the Tektronix printer driver for Windows

System requirements

Accessing on-line help

Printing From a PC

The Tektronix Windows printer driver requires the following hardware
and software:
An IBM or compatible computer, with a 386 or higher processor.
One ßoppy-disk drive (3.5-inch drive with 1.44-Mbyte capacity),
and a hard disk.
Two Mbytes of memory.
MS-DOS 5.0 or higher operating system, and Windows 3.1.
On-line help is available in two ways:
For general Windows 3.1 information about printers and setting
options, select Help from the Control Panel menu bar and choose
a topic from the Help menu. A Help window appears, offering
information on the selected topic and listing other related topics.
The Tektronix driver uses the Microsoft help Þle PSCRIPT.HLP.
This Þle is shipped with the Microsoft PostScript driver and must
be installed before you can use Help. After installing this Þle, you
can get information about the Tektronix driver by choosing Help
in the Setup dialog box. (Access this dialog box through the
Printers dialog box then the Printers-ConÞgure dialog box.)
Printing Reference
3-1