Obtaining The Pc Utility Files; Mounting The Files From A Pc Dos Diskette - Tektronix Phaser 220e Reference Manual

4
Printing from a Workstation
Obtaining the PC utility Þles
Mounting the Þles from a PC DOS diskette
4-4
Phaser 220 Drivers and Utilities
Note If your computer is connected to an Ethernet network such as
NetWare or TCP/IP, you should delete the Control-D characters
from each utility Þle you plan to use. Refer to the topic ÒAbout
Control-D charactersÓ in this chapter for instructions.
You can use the Þles on the Printer Utilities diskette for PC/DOS on a Unix
workstation by mounting the diskette according to the following procedure.
Then use the lpr command to send the Þles to the printer.
Note
You must be ÒsuperuserÓ or ÒrootÓ to perform this procedure.
1.
Create a directory for the utility Þles, for example:
/tmp/utilities
2. Place the diskette into the workstationÕs disk drive.
3.
To mount the diskette, type the following command:
mount Ðr Ðt pcfs /dev/fd0 /pcfs
4. Change the directory to the diskette by typing the following
command:
cd /pcfs
5. Copy the Þles to your workstation to the directory you created
in Step 1:
cp Ðr * /tmp/utilities
6.
When you have Þnished copying the Þles that you want, change
back to the top directory by typing cd and pressing return.
7.
Unmount the diskette by typing the following command:
umount Ðav Ðt pcfs
8. Eject the diskette by typing eject and pressing return.