6
Selecting Color Corrections
Turning off all color corrections
6-18
Phaser 220 Drivers and Utilities
If you do not want to use any Tektronix color corrections, you can specify no
corrections either from a Tektronix driver or with utility Þles and switches.
Select no corrections when you are using applications that do their own
color adjusting.
Printing from a Macintosh
Choose one of the following methods to turn off all color corrections.
Macintosh driver: Select the None option in the TekColor
Options dialog box.
Macintosh utility Þle:
Phaser 220i: Place both Switches 8 and 9 up and send the No Color
Correction utility Þle to the printer.
Phaser 220e: Place Switch 3 up and send the No Color Correction
utility Þle to the printer.
Rear panel switches:
Phaser 220i: Place both Switches 8 and 9 down to turn off all color
corrections.
Phaser 220e: Place Switch 3 down to turn off all color corrections.