Tektronix Phaser 220e Reference Manual page 94

6
Selecting Color Corrections
6-8
Phaser 220 Drivers and Utilities
A utility Þle color correction is overridden if certain rear panel
switches are changed to another position.
On the Phaser 220i, if Switches 8 and 9 are both up, the current
utility Þle color correction is used; if Switch 8 or Switch 9, or both
switches, are placed in the down position, the utility Þle color
correction is disabled.
On the Phaser 220e, if Switch 3 is up, the current utility Þle color
correction is used; if Switch 3 is down, the utility Þle color correction
is disabled.
Sending utility files to the printer
All of the color correction utility Þles described in this chapter are sent to the
printer by the same method; use the following instructions for your
computer type to send Þles to the printer.