Tektronix Phaser 220e Reference Manual page 135

6.
Click the Rename button.
7. At the conÞrmation dialog box, click OK.
8. Open the Chooser to reselect the printer with its new name.
PC and workstation users
1.
Locate the PRNTNAME.PS Þle in the PHSR220 directory on the
Printer Utilities diskette.
2. Copy the Þle to your hard disk so that you can edit it.
3. View the PRNTNAME.PS Þle.
4.
Edit the Þle to substitute a different printer name for (My Printer
Name) in the /PrinterName line.
5. PC users: Use the DOS COPY command to send the Þle to the
printer. For example, if you want to send the Þle to the parallel
port, type the following at the DOS prompt:
COPY Þlename LPT1:
(or COM1: if you want to send the Þle to the serial port).
Workstation users: ConÞgure the printer ports to receive
PostScript, then send the Þle to the printer.
Note Some text editors add a carriage return or line feed after the last
Control-D character in a Þle you are editing. If your computer is
connected to the printer through the parallel or serial port, you
need to delete the extra characters following the last Control-D.
If your computer is connected to an Ethernet network such as
NetWare or TCP/IP, you should delete the Control-D characters
at the beginning and end of the Þle. If you have a workstation,
refer to Chapter 4, ÒPrinting From a Workstation,Ó for
information on the delctrld shell script for deleting Control-D
characters.
Modifying Printer Operation
Printing Reference
8
8-3