Tektronix Phaser 220e Reference Manual page 127

*Available only on the Phaser 220i.
Macintosh users
1. The Format Printer Disk Þle is compressed into the Phaser 220
Utilities.sea archive Þle on the Macintosh Printer Utilities diskette,
and must be decompressed before you can use it. To decompress
this Þle, follow the steps listed under the topic ÒDecompressing
the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore You Begin.Ó After
decompressing the Þle, continue with the steps listed below.
2. Select the appropriate printer in the Chooser.
3. Locate the Format Printer Disk Þle in the folder on your hard disk
containing decompressed utility Þles.
4.
Double-click the Format Printer Disk self-sending arrow icon to
send the Þle to the printer.
5. Click OK in the dialog box to format the SCSI hard disk.
PC and workstation users
1. Locate the FRMTDISK.PS Þle in the PHSR220 directory on the
Printer Utilities diskette.
2.
Copy the Þle to your hard disk, or use the Þle from the diskette.
3. PC users: Use the DOS COPY command to send the Þle to
the printer.
Workstation users: Send the Þle to the printer.
Using Fonts and SCSI Hard Disks
Printing Reference
7
7-11