Printing The Pantone Color Chart - Tektronix Phaser 220e Reference Manual

6
Selecting Color Corrections
Printing the PANTONE
6-28
Phaser 220 Drivers and Utilities
Ò
Color chart
Note
Do not use any color corrections in a driver, or with switches, or
with downloadable utility Þles, when printing the PANTONE
color chart or when selecting PANTONE Colors in
an application.
The PANTONE¨-Tek Phaser 220 (PANT220.PS) Þle prints a PANTONE Color
sampler chart (about 36 pages in length). Use the chart to select colors
within an application that allows you to specify PANTONE Colors.
Macintosh users
Note If you donÕt want to use a utility Þle, place Switch 8 and Switch 9
down for no color correction on the Phaser 220i, or place
Switch 3 down for no color correction on the Phaser 220e.
1.
Decompress the Phaser 220 Samplers.sea and the Phaser 220
Utilities.sea Þle from the Macintosh Printer Utilities diskette onto
your hard disk. Follow the instructions in the topic
ÒDecompressing the Macintosh utility ÞlesÓ in Chapter 1, ÒBefore
You Begin.Ó
2. Send the No Color Corrections Þle to the printer.
a.
Phaser 220i: Place both Switch 8 and Switch 9 in the up
position.
Phaser 220e: Place Switch 3 in the up position.
b.
Select the appropriate printer in the Chooser.
c. Locate the No Color Corrections file in the folder on your hard
disk containing decompressed Þles.
d. Double-click the ÞleÕs self-sending arrow icon; click OK in the
dialog box to send the Þle to the printer.