Tektronix Phaser 220e Reference Manual page 125

PCSEND (LPT)
To see the PCSEND.EXE explanation screen, do the following steps:
1. Insert the Printer Utilities diskette into your computer's disk drive:
for example, drive B.
2. To access the Þle, type the following command:
B:\PHSR220\PCSEND
and press Return.
An explanation screen appears showing command format and a list of ßags.
To use PCSEND.EXE, do the following procedure:
This font downloader uses the DOS command line format to
download fonts and other PostScript Þles to the printer. You need
to specify three parameters. For example, to download a font to
the printer's virtual memory, type:
PCSEND Ð2 Ðv CN_____.PFB
where:
Ð2 is the number of the computer's port the printer is connected
to;
Ðv is the ßag specifying downloading a .PFB Þle to the printer's
virtual memory;
CN_____.PFB is the font software.
Using Fonts and SCSI Hard Disks
Printing Reference
7
7-9