Using This Manual; Printing Reference Chapters - Tektronix Phaser 220e Reference Manual

1
Before You Begin

Using this manual

Printing reference chapters

Chapter title
1 Before You Begin
2 Printing From a
Macintosh
3 Printing From a PC
4 Printing from a
Workstation
5 Selecting Media and
Image Options
6 Selecting Color
Corrections
7 Using Fonts and SCSI
Hard Disks
8 Modifying Printer
Operation
9 Using Different Printer
Language Modes
10 Troubleshooting
Index
1-2
Phaser 220 Drivers and Utilities
Refer to the chapters in this manual depending on the type of computer you
are using and the information you are looking for.
Chapter contents
Explains how to use the diskettes.
Explains how to install and use the
Tektronix driver and printer description Þles
for Macintosh applications.
Explains how to install and use the
Tektronix driver and printer description Þles
for PC Windows applications, and includes
information on printing from DOS.
Explains how to obtain utility Þles, and
includes PostScript code for some utility
Þles on the Printer Utilities diskette.
Explains how to make paper size and
image orientation selections in the
Macintosh and Windows drivers.
Explains how to make color corrections
with driver settings, utility Þles, and printer
switches, and how to print and use the
color sampler charts.
Explains how to use fonts, format a SCSI
disk for font storage, and control Sys/Start
Job execution.
Explains how to perform specialized tasks
to modify the printer's behavior, such as
turning off the printerÕs startup page.
Explains how to switch between PostScript,
¨
HP-GL, and PCL 5.
Gives solutions to a variety of problems
and special cases.
A detailed cross-reference to help you Þnd
the information you need.
For For PC
Macintosh users
users
For
Workstation
users