Tektronix Phaser 220e Reference Manual page 55

7.
When prompted, insert the Tektronix Windows 3.1 Printer Driver
diskette into your computerÕs disk drive.
8. Type in the disk drive location of the diskette, and type in the
\WPD subdirectory on the diskette:
B:\WPD
9. Choose OK.
10. Choose your printer from the list, then choose the OK button.
Note
Printers using the Tektronix Windows driver have (TekColor)
listed in their name. Printers without this designation are using
the standard Microsoft Windows PostScript driver and the
WPD Þle.
11. When asked to insert a diskette with the updated PSCRIPT.DRV
Þle, enter the path for your Windows System directory, or insert
the appropriate Microsoft Windows diskette, so that the current
PSCRIPT.DRV Þle is used. (The PSCRIPT.DRV Þle is not included
on the Tektronix diskettes.)
Printing From a PC
Printing Reference
3
3-17