Initializing A Formatted Scsi Device; Macintosh Users; Pc And Workstation Users - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

Initializing a formatted SCSI device

Macintosh users

PC and workstation users

Most external hard disks are formatted at the factory and only need to be initialized.
1.
From the printer's CD-ROM, run the Installer application. Select Custom
Install. Select Printer Utilities. From your computer's hard disk, open the
PhaserTools folder. Open Printer Utilities.
2.
In the Chooser, select your printer.
3.
From the PhaserTools folder, double-click Apple Printer Utility. Download to
the printer the Initialize Printer Disks file.
1.
From the printer's CD-ROM, run setup.exe. Select Custom Install. Select
Printer Utilities. From your computer's hard disk, open the PHSRTOOL
directory. Open the PHSR780 subdirectory.
2.
Use one of the following methods to send to the printer the INITDISK.PS
file:
PC users: Use the DOS COPY command.
Workstation users: Send the file to the printer as you would any
PostScript file.
Advanced Features and Troubleshooting Manual
Connecting Peripheral Devices
7
89