Tektronix Phaser 220e Reference Manual page 115

3.
To print the charts, do the following steps:
a. Locate the LaserWriter Utility in the folder on your hard disk
containing decompressed Þles. Double-click the LaserWriter
Utility icon to start the application.
b.
Select Download PostScript File from the Utilities menu.
c. Select the PANTONE
d. At the prompt Save PostScript output as: you are
asked for a Þle name for saving printer output. Use the
default name given in the edit box or type in a new name.
Then click Save to send the Þle to the printer.
e. If no output is returned by the printer, the LaserWriter Utility
displays a dialog box. Click OK in the box to continue.
4. Select PANTONE Colors within an application using the colors on
the chart.
5.
If you are printing from a Tektronix driver: Print your document
with the None option selected. Any other color correction
selection in the driver will cause the PANTONE Colors to print
differently.
If you are not using a Tektronix driver: Print your document
with no color correction on a Phaser 220i with Switches 8 and 9 in
the down position (Switch 3 in the down position on a Phaser 220e).
Selecting Color Corrections
Ò
-Tek Phaser 220 file, and click Open.
Printing Reference
6
6-29