For Macintosh Users; Opening The Read Me Files On The Diskettes; Using The Macintosh Driver - Tektronix Phaser 220e Reference Manual

1
Before You Begin

For Macintosh users

Opening the READ ME Þles on the diskettes

Using the Macintosh driver

Using the Macintosh utility Þles
1-6
Phaser 220 Drivers and Utilities
Each Macintosh diskette contains a READ ME Þle providing information
that arrived too late to be included in this manual. These READ ME Þles
were written in the TeachText program. You must have a copy of TeachText
installed on your hard disk to read these Þles. If you don't have a copy
already installed, copy TeachText from the same Apple system software
diskettes you last used to upgrade your computer.
Install the Tektronix Macintosh driver according to the instructions in
Chapter 2, ÒPrinting from a Macintosh.Ó Then refer to other chapters in this
manual to perform common tasks, such as making color corrections.
Chapter 2 also contains instructions for using the LaserWriter 8.0 printer
driver with the Phaser 220 printer.
The Macintosh Printer Utilities diskette contains compressed archive Þles
with .sea extensions. These compressed Þles each contain a group of Þles.
For example, the Phaser 220 Utilities.sea Þle contains the printer utility Þles
for performing such tasks as turning off the printerÕs startup page. You need
to decompress an entire archive Þle onto your hard disk, then delete the
individual Þles you don't want to use.
Decompressing the Macintosh utility files
1. Insert the Macintosh Printer Utilities diskette into your computer's
disk drive.
2.
Double-click one of the compressed Þles.
3. At the Self-Extracting Archive dialog box, click Continue .