Before You Print The Cmyk, Rgb, And Hsb Color Charts - Tektronix Phaser 220e Reference Manual

Before you print the CMYK, RGB, and HSB color charts

Driver/File/Switch
Driver setting
(Macintosh and
Windows)
Simulate Display
Vivid Blue
Use Printer Setting (standard defaults, or
Simulate Press
None
*For the utility Þle color corrections to take effect, Switches 8 and 9 on a Phaser 220i must both be in the up position
(Switch 3 up on the Phaser 220e) before the utility Þle is downloaded to the printer.
**Make sure you use the same color correction to print the chart and to print the colors from an application.
To match colors on the charts to colors selected within an application, use the
same printer color correction to print the charts that you are going to use
when selecting and printing these colors within an application. The
following table lists the driver color correction settings with their
corresponding utility Þles or switch settings. For example, if you are going
to print from an application with the driverÕs Vivid Blue option selected,
then print the color chart with the Vivid Blue (VIVDBLUE.PS) utility Þle or
set Switch 8 up and Switch 9 down on the Phaser 220i, or set Switch 3 up on
the Phaser 220e. Or, if you are not using a Tektronix driver, use the same
utility Þle or switch setting to print the chart and to print from an
application.
Macintosh utility
file name*
Simulate Display
Vivid Blue
any utility Þle)**
Simulate Press
No Color Correction
PC utility Phaser 220i
file name* alternate switch
setting
DISPLAY.PS
VIVDBLUE.PS Or, for Vivid Blue:
Switch 8 up and
Switch 9 down
(standard defaults,
or any utility Þle)**
SIMPRESS.PS Or, for Simulate
Press:
Switch 8 down
Switch 9 up
NOCORECT.PS Or, for no color
corrections:
Switch 8 down and
Switch 9 down
Selecting Color Corrections
Phaser 220e
alternate
switch setting
Or, for no color
corrections:
Switch 3 down
Printing Reference
6
6-25