Sharing The Printer On A Network - Tektronix Phaser 220e Reference Manual

Sharing the printer on a network

If your Phaser 220 printer is shared by other users on a network, using the
utility Þles and switches to change the printerÕs default color correction
setting can affect prints made by other users.
All Tektronix driver selections, except Use Printer Setting,
override the printerÕs switches and downloaded utility Þles.
The Tektronix driverÕs Use Printer Setting option uses the
printerÕs current default settings as set by one of the utility Þles or
switches.
On the Phaser 220i, setting Switch 8 up and Switch 9 down enables
the Vivid Blue color correction.
On the Phaser 220i, setting Switch 8 down and Switch 9 up enables
the Simulate Press color correction.
On the Phaser 220i, setting both switches in the down position turns
off all hardware color corrections.
On the Phaser 220i, if both switches are in the up position, the
factory default is Euroscale Press if no utility Þle has been
downloaded.
On the Phaser 220i, if both switches are in the up position, then you
can send a utility Þle to the printer to set a color correction.
On the Phaser 220e, setting Switch 3 up causes the current utility Þle
color correction to be used.
On the Phaser 220e, setting Switch 3 down turns off all color
corrections.
On the Phaser 220e, if Switch 3 is up, the factory default color
correction is Vivid Blue if no utility Þle has been downloaded (or,
you can send a utility Þle to the printer to set a different color
correction).
Troubleshooting
Printing Reference
10
10-13