8
Modifying Printer Operation
PC and workstation users
8-10
Phaser 220 Drivers and Utilities
1.
Locate the RESET.PS Þle in the PHSR220 directory on the Printer
Utilities diskette.
2.
Copy the Þle to your hard disk, or use the Þle from the diskette.
3.
PC users: Use the DOS COPY command to send the Þle to
the printer.
To send the Þle to the parallel port, type:
COPY Þlename LPT1:
(or COM1: if you want to send the Þle to the serial port).
Workstation users: ConÞgure the printer port to receive
PostScript, then send the Þle to the printer.