Pdf Printer Description Files - Tektronix Phaser 220e Reference Manual

2
Printing From a Macintosh
PDF printer description Þles
2-12
Phaser 220 Drivers and Utilities
Note
You should always use the most current printer description Þle.
To determine the date of the Þle you are using, select (highlight)
the Þle and choose Get Info from the File menu. Then check the
Tektronix Bulletin Board Service (BBS) for the most current
printer description Þles; refer to Chapter 10, ÒTroubleshooting,Ó
for instructions on using the BBS.
The Phaser 220 32.PDF is a printer description Þle for QuarkXPress 3.2, and
Phaser 220 311.PDF is a printer description Þle for QuarkXPress 3.11.
QuarkXPress lets you install support for additional printers beyond those
shipped with the application. These Þles add the Phaser 220i or 220e printer
to the QuarkXPress list of supported printers.
Note In QuarkXPress, if you select the 60 lines-per-inch halftone
screen, you will get Tektronix' halftone screens optimized for the
media type you select.
To install a PDF Þle, do the following:
1. Place the Þle that you need in the same folder as the QuarkXPress
application on your computer's hard disk.
2. Open QuarkXPress and select Page Setup in the File menu.
3. The printer's name appears alphabetically in the list of installed
printers in the QuarkXPress custom Page Setup dialog box.
Note
To avoid printing errors, use the correct PDF Þle for the version
you are using. Also, for hints and tips on printing from
QuarkXPress, request a document catalog from HAL, the
Tektronix automated fax system. Call (503)-682-7450 (direct) or,
in the U.S. and Canada, call 1-800-835-6100. Refer to Chapter
10, ÒTroubleshooting,Ó for details on using the HAL system