Description Method For Indirect Entry - Mitsubishi Electric MELDAS C6 Programming Manual

1. PLC Development Environment Using GX Developer

1.5.2 Description Method for Indirect Entry

The following explains the description method for creating device comments using a spreadsheet
tool or like. The following example describes device comments using a spreadsheet tool.
Device-
only
column
Column data format
Device
Equipment name
Comment
(Note) Describe data in any of the following combinations.
(1) Device, equipment name, comment
(2) Device, comment
(3) Device, equipment name
Save the above data in the CSV format. The following example shows the above data saved in the
CSV format.
X0, SAFETY, Safety unit run
X1, COVER, Safety cover close
X2, READY, Operation ready complete
X3, OIL-M, Oil pressure motor
X4, PARTS-A, Parts A ready complete
1.5 Creating Device Comments
Safety unit run
Safety cover close
Operation ready complete
Oil pressure motor
Parts A ready complete
Equipment Comment-
name-on ly only
column column
(1) Describe a device.
• Conversion cannot be made if a device has not been described.
Always describe a device.
(2) A device is a required item. Describe it in one-byte code.
(1) Describe an equipment name.
• It is not registered if the device part on the same row is blank or the
device is illegal.
(2) You can describe an equipment name of up to 8 characters.
(1) Describe a comment.
• It is not registered if the device part on the same row is blank or the
device is illegal.
(2) You can describe a comment of up to 32 characters.
- 42 -
Get other manuals https://www.bkmanuals.com
Describe device, equipment
name and comment on the
same line.
Explanation